Monday, 28 April 2014
Final scene pictures
This is the final version of my scene. I added palm trees around the scene and broke up the clutter with the trees. I added barrels around to make it look like it was not very well looked after and I also added cardboard boxes around the scene such as in the bushes and in front of the house. I also textured the surfboards because they were not textured in alpha and added in the new sunbeds for on the beach. Here are a few screen shots of the scene from various angles.
After Alpha
After alpha I realised how far behind I really was with the work. I said in the previous post about how I cut down on certain objects to help me build my scene faster. I left them out and updated my plan to show this. I stopped using my plan which was the main cause of why I was falling behind because I didn't have a weekly jog of where I needed to be in my current creation of my scene. This is the updated version of my plan with the part in red being the ones that I had to cut out.
I chose to cut out the chairs and table and the bike. The small Jeep and I changed various other objects to different things that I could create fast to clutter my scene.
I chose to cut out the chairs and table and the bike. The small Jeep and I changed various other objects to different things that I could create fast to clutter my scene.
Alpha Pictures.
This is what my level looked like in the Alpha stage of the design. The sky box has changed and vanished so it is different in these shots. I have textured the shacks and the fences and tried to block off the back parts of the level with rocks and with a road that goes up into the mountain. However I don't think it fits the theme or look of the level so I am going to change it later on. I was very behind at this point of the alpha because of my other module. This is when I decided that I needed to cut some of the models from my work. So I decided to cut the jeep/car the table and chairs and the bike from my scene.
This is the shack textured and in the level next to the smaller shack. I like how it turned out but it is still missing the normal maps from the roof part. I will be adding them onto it soon after the alpha
This is the small shack with the geometry for the surf boards outside of it. I need to texture the new boards in order to get them to look and fit in the scene, and it is what I am going to be doing next.
I took this shot to compare this scene to the blockout version of the scene. As you can see I started to block off the left and right sides of the scene with various things like rocks and mountain and roads. I added a mountain to the back of the level to attempt to block it off and i extended the fences round the side of the house to create some sort of road.
I took this shot as well to compare to what the sea looked like in the blockout version of the level. I have the water shore line effect working on the sea and I am pleased with the results from it overall.
This is the shack textured and in the level next to the smaller shack. I like how it turned out but it is still missing the normal maps from the roof part. I will be adding them onto it soon after the alpha
This is the small shack with the geometry for the surf boards outside of it. I need to texture the new boards in order to get them to look and fit in the scene, and it is what I am going to be doing next.
I took this shot to compare this scene to the blockout version of the scene. As you can see I started to block off the left and right sides of the scene with various things like rocks and mountain and roads. I added a mountain to the back of the level to attempt to block it off and i extended the fences round the side of the house to create some sort of road.
I took this shot as well to compare to what the sea looked like in the blockout version of the level. I have the water shore line effect working on the sea and I am pleased with the results from it overall.
Alpha Water
For my alpha I wanted to change the water in my level. I did this by following this tutorial. it was extremely helpful and I am very grateful to the person who created it because it helped me a lot.
It used an existing material in the UDK editor and changed it to give it a shore like looking effect. I was very pleased with the results in the end.
This is the effect achieved by the shore in my level for the alpha stages. The line is red for now and it shows around anything that the sea touches. This is good because it is also working with the rocks and other things I have placed around the edge of the map
This is the material in its current state. The red constant3 is what gives the seas border the colour, so I am changing it for a texture for the edge of the sea.
I changed the constant vector to a texture sample to see what results this would give me when I applied it to the sea.
It used an existing material in the UDK editor and changed it to give it a shore like looking effect. I was very pleased with the results in the end.
This is the effect achieved by the shore in my level for the alpha stages. The line is red for now and it shows around anything that the sea touches. This is good because it is also working with the rocks and other things I have placed around the edge of the map
This is the material in its current state. The red constant3 is what gives the seas border the colour, so I am changing it for a texture for the edge of the sea.
I changed the constant vector to a texture sample to see what results this would give me when I applied it to the sea.
This is the effect the shore gives off with the texture sample in place of the constant 3 vector. Overall I am very pleased with the results and think it looks very good. Also the way the sea moves also makes this texture move up and down with it which gives a good effect that I am very pleased with.
Level Blockout pictures
This is what my level looked like in the state of the blockout. All the geometry was very basic but it got across the point I wanted to make to make my level look the way it does. The water looked really bad but it was what I put in to get a quick representation of what I wanted and it was going to be replaced soon when i started to import my assets and play around with the dynamics of the sea.
This was the main shot of the blockout of the level that I think was most important. This was the main focus of the scene and I used the udk trees to block out the foliage of the level even though they were probably too dense for what I wanted.
This is a shot of the smaller shack that I am going to create by using some of the pieces from the bigger shack. As long as I get the main shack done this shouldn't take too long to complete.
This is quite a nice shot. This shows how much empty space I have around the back of the level that really does need blocking off. I need to think of something that I can place on either side of my level to block off the edge of the map. I was thinking of using more shacks or even rocks or roads to do this.
This is currently what the water looks in my level. it was created using some of the meshes in UDK just to add the style to the level. I thought I would include a shot of this now so I can compare it to the shots when I change the level.
This was the main shot of the blockout of the level that I think was most important. This was the main focus of the scene and I used the udk trees to block out the foliage of the level even though they were probably too dense for what I wanted.
This is a shot of the smaller shack that I am going to create by using some of the pieces from the bigger shack. As long as I get the main shack done this shouldn't take too long to complete.
This is quite a nice shot. This shows how much empty space I have around the back of the level that really does need blocking off. I need to think of something that I can place on either side of my level to block off the edge of the map. I was thinking of using more shacks or even rocks or roads to do this.
This is currently what the water looks in my level. it was created using some of the meshes in UDK just to add the style to the level. I thought I would include a shot of this now so I can compare it to the shots when I change the level.
Level Blockout
Level Blockout
I decided to create my blockout of my level in UDK I used the BSP to create the basic geometry of my concept arts layout and created the terrain using the terrain tools in UDK also. I used some of the Static meshes for tree that are already in the content browser to create the basic look and feel of the trees in my level they are all place holders and will not be used in my level when I come to creating the assets myself.
I need this completed for the Concept and planning presentation that is currently close. I have included my project plan from the previous post in my presentation and will show it during my presentation. I have a mood board which I created quickly to show the look and feel of my level when I show off my blockout version of my level. I've talked about the previous concept art that I looked at and why I like it and why I went with the decision I made about the final concept art that I chose. I have a video of my level in its current state that I had to record using my phone because UDK was crashing when I tried to render anything out with matinee.
Subscribe to:
Posts (Atom)